Symptoms
Fan works only on the highest setting, or not at all.
Likely cause
A failed blower resistor pack or worn switch.
Suggested fixes
Listed roughly in the order most owners try them.
- 1
Replace the resistor pack
The resistor sits in the heater box. Replace it and check the connector.
- Difficulty:
- Easy DIY
- Cost:
- £ (Under about £50 in parts)
- 2
Replace the fan switch
If the resistor is good, the switch contacts are often burned.
- Difficulty:
- Easy DIY
- Cost:
- £ (Under about £50 in parts)
This is general guidance gathered from owner experience and workshop practice, not a substitute for a workshop manual or a qualified mechanic. Costs are rough parts-only guides. Brakes, steering and suspension work affects safety, so if in doubt have it checked professionally.
Related faults
- HeatingMedium severity
Wet passenger footwell or sweet smell (heater matrix)
Damp passenger footwell, sweet smell of coolant, misting windscreen, coolant loss.
Series I · Series II / IIA · Series III · 90 / 110 / 127 · Defender2 fixes - HeatingLow severity
Puma heater blows cold
Heater stays cold or lukewarm while the engine is up to temperature.
Defender · 2.4 Puma, 2.2 Puma2 fixes